Xiaomi Redmi 5A 100% Working,

Recently I bought my lego le  Mi 5A. I'm looking for the small 5 inch display phone but in the market, most of the phones are 5.5 inches or above. Not only this, we were looking for a budget phone and the Mi 5A attracts my gravity. Mi 5A is the best way if you are looking for a budget phone. After buying this Mi 5A I used my root hand to do it. If you're looking for Mi 5A rooting system, you can try this. Here I am about to step through the Mi 5A root method. If you like it you should try it at the lowest price mobile phone ..


    

Warning: There is no responsibility for any error or problem caused by following this guide. Do your own risk.



A  Preparation:
                        1) Install your ADB driver..
                        2) Expand ADB.zip and you.,
                        3) Now paste the twrp.img in the ADB file,

B. Open the MI 5A boot loader : 
                            
                        1) To MiUnlock, sign in with your Mi ID and start with the right reason,.
                       2)  After a few days you will get confirmation on your phone via SMS.,                                                 3) Delete the miflash_unlock-en-2.3.803.10.zip file once you confirm it.,
                       4) Shut down your phone manually,,,
                       5) Now hold Volume down key and Power button to enter Fastboot mode..
                       6) Connect your phone to PC using USB cable and click “Unlock.,

  

8) process completed just hit the reboot button:


C. Instalar Diversion Recovery in Mi 5: 

     1)Connect your Mi 5A PC via USB cable now. 

     2) Maxisz Zip and Lajilifsher-one-Open ADB folder

    3) Inside the folder, press the "Shift" key and then right click "Open the Windows command          here

         
                     
D Install SuperSu and Root Mi 5A

         Tap on install and choose lazyflasher-no-verity-opt-encrypt.zip
         Once it has done tap on Reboot System
         Then uncheck "Prompt to install TWRP app if not installed" and "Install system app"
         Now tap on Do not install.,
         Again boot into TWRP just by switching off your device then press and hold Power + Vol Up                button
         You are now on TWRP, tap install
         Browse the Magik zip file and swipe to Install
         As soon as it flashed tap on Rebot to system
        The booting process may take 5 to 15 minutes.

No comments:

Post a Comment

Popular